|
|
Centrifugas de Uso General
Allegra X-5
Beckman Coulter
Maximum speed and capacity for high-throughput labs.
This air-cooled benchopcentrifuge was designed specifically for the clinical laboratory. The Allegra X-5 performs with endurance under the most exacting standards, offering enhanced productivity and reliability for almost any clinical sample preparation. Convenient, pre-bundled packages-including swinging bucket rotors and common adapters-get you up and running quickly. Or you can choose from a selection of optional adapters. The Allegra X-5 is ideal for serum, plasma and whole blood sample processing; protein precipitate, particulate and cell sedimentation; in-vitro cytotoxicity and receptor binding sample processing.
Especificacione Técnicas
| UNSPSC: |
41103903 |
| Height, door closed: |
39.0 cm (15.3 in.) |
| Height, door open: |
88.0 cm (34.6 in.) |
| Width: |
49.6 cm (19.5 in.) |
| Depth: |
63.4 cm (25.0 in.) |
| Weight: |
77 kg (169 lb) |
| Electrical Requirements: |
120 VAC, 12A, 60 Hz |
| Maximum Heat Dissipation into Room under
Steady-State Conditions: |
3750 BTU/hr (1.1 kW) |
| Set Speed: |
100 to 4700 RPM (in 100-RPM increments) |
| Set Time: |
1 min. to 9 hr 59 min, (in 1 min.
increments) |
| Speed Control: |
actual rotor speed, ± 50 RPM of set
speed |
| Ambient Temperature Range: |
5 to 40°C |
| Clearances Required: |
30 cm (11.8 in.) |
| Humidity Restrictions: |
<80% (noncondensing) |
| Pollution Degree: |
2 |
| Time -- Actual Display: |
time remaining in run (timed run ± 1 minute)
or ? and elapsed time (continuous run) |
| Acceleration: |
10 acceleration rates |
| Deceleration: |
10 deceleration rates |
| Installation Category: |
II |
| Speed Display: |
actual rotor speed in 100-RPM increments or in
RCF (when selected) |
|
|
