| UNSPSC: |
41103904 |
| Height: |
34.3 cm (13.5 in) |
| Width: |
76.2 cm (30 in) |
| Depth: |
62.2 cm (24.5 in) |
| Weight: |
121 kg (267 lb) |
| Approximate Acceleration Time: |
10 Acceleration rates |
| Approximate Deceleration Time: |
11 Deceleration rates |
| Drive Type: |
Brushless Induction |
| Electrical Requirements: |
208 V, 60 Hz instrument, 187-229 VAC, 9
A |
| Max Speed: |
10,200 rpm with fixed-angle rotor; 3,750 rpm
with swinging bucket rotor |
| Noise Level 0.91 meters (3 feet) in Front of
Centrifuge: |
= 68 dBa |
| Set Speed: |
200 to 10,200 rpm in 10-rpm increments |
| Set Temperature: |
-10 to +40°C in 1° increments |
| Set Time: |
Timed (Up to 99 hours, 59 min); Hold, Pulse
(short run) |
| Temperature Control: |
± 2°C of set temperature (after
equilibration) |
| Ambient Temperature Range: |
10 to 35°C |
| Humidity Restrictions: |
< 75% (noncondensing) |
| Pollution Degree: |
2 |
| Audible End-of-Run Tone: |
Yes |
| Automatic Rotor Identification: |
Yes |
| Control panel material: |
Coated polystyrene copolymer |
| Housing Surfaces: |
Acrylic baking enamel |
| Installation Category: |
Category II |
| Refrigeration: |
Yes, CFC-Free |
| Relative Centrifugal Field (RCF): |
11,400 x g with fixed-angle rotor;
3,270 x g with swinging bucket
rotor |
| Speed Display: |
Actual rotor speed in 10-rpm increments |
| Timed Run: |
Indicates run time remaining |
| User-Defined Programs: |
10 |
| Ventilation Clearances Required: |
7.6 cm (3.0 in) (sides and
rear) |
