| UNSPSC: |
41103904 |
| Height: |
40.5 cm (16.0 in) |
| Width: |
65.0 cm (25.6 in) |
| Depth: |
68.5 cm (27.0 in) |
| Weight: |
124.0 kg (273.4 lb) |
| Approximate Acceleration Time: |
10 acceleration profiles |
| Approximate Deceleration Time: |
10 deceleration profiles |
| Electrical Requirements: |
60 Hz, 208 V |
| Maximum Heat Dissipation into Room under
Steady-State Conditions: |
2.0 kW (6,824 Btu/hr) |
| Noise Level 1 Meter in Front of
Centrifuge: |
68 dBA |
| Set Speed: |
Actual rotor speed ± 50 rpm or equivalent
RCF |
| Set Temperature: |
-20 to +40° C in 1° C increments |
| Set Time: |
to 9 hr 59 min or continuous (hold) |
| Speed Range: |
to 15,000 rpm |
| Temperature Control: |
± 2° C of set temperature (after
equilibration) |
| Ambient Temperature Range: |
10 to 35° C ambient |
| Clearances Required: |
7.6 cm (3.0 in) |
| Humidity Restrictions: |
< 80% (noncondensing) |
| Pollution Degree: |
2 |
| Time -- Actual Display: |
Indicates run time remaining/(8) indicates
elapsed time |
| Finish: |
Control panel: coated polycarbonate. Housing
surfaces: urethane paint. |
| Ventilation Clearances Required: |
7.6 cm (3 in) Sides and
Rear |
