Menú del Usuario

 

ULTRACENTRIFUGA

Ultracentrífuga
Airfuge Air-Driven

Beckman Coulter

Ultracentrifuga Airfuge Air-Driven

With the ability to provide a simple, rapid method for removing chylomicrons (fat particles in lipemic samples), the Airfuge Air-Driven Ultracentrifuge delivers accurate results for lipemic clarification. lipemic samples can be cleaned in 10 minutes, eliminating the need for sendouts.

Características:

The easy-to-operate tabletop centrifuge:
  • Reaches top speed in only 30 seconds
  • Decelerates smoothly to keep sample contents separated
  • Offers timed runs up to five hours with hold position for long runs
  • Operates near ambient teperature
The Airfuge Air-Driven Ultracentrifuge offers enhanced versatility with a variety of rotors:
  • Batch Rotor pellets particles from a large sample
  • Electron Microscopy Rotor sediments particulates from very small volumes on to supports suitable for insertion into an electron microscope
  • Four fixed angle rotors generate the high speeds and forces necessary to perform a variety of tasks
Especificacione Técnicas

UNSPSC: 41103901
Height: 20 cm (8 in)
Width: 28 cm (11 in)
Depth: 38 cm (15 in)
Weight: 10.4 kg (23 lb)
Approximate Acceleration Time: 30 to 60 sec
Approximate Deceleration Time: 2.5 to 5.5 min
Electrical Requirements: 50 Hz, 100 or 220 to 240 VAC; 60 Hz, 120 VAC
Set Time: to 5 hr in 5-min increments or continuous (hold)
Speed Range: 80,000 to 110,000 rpm
Pollution Degree: 2
Finish: Control panel: coated polycarbonate. Top surface: urethane paint. Other surfaces: general purpose paint.
Ventilation Clearances Required: 7.6 cm (3 in) both sides and rear






Se aceptan pagos con tarjetas de crédito.

Copyright © 2005 - www.labequim.com.mx
ventas@labequim.com.mx
25 ote. #217 San Pedro Cholula, Puebla, Pue; Col. San Pedro Mexicaltzingo;
TEL/FAX: 01 (222) 219 8815, 274 5072, 274 5073